Vision Lighting, Inc.
Fluorescent Spraybooth
Food Processing

Application Features
Premium-grade, fluorescent, special application industrial fixture. Inside access spray booth. For use in hazardous locations.

Die formed and spot welded, heavy gauge cold rolled steel housing assembly. One piece 60° beveled perimeter door frame assembly, fabricated from 14 gauge cold rolled steel or 1/8" thick commercial grade aluminum. Closed cell neoprene gasket ensures seal between door frame assembly and housing. Closed cell neoprene gasket seals the flange against the mounting surface. Knockouts are provided for flexible conduit attachment.

Housing is mounted into precut panel hole and fastened directly to the spray booth panel, The fasteners pierce through the flange gasketing, thus sealing the fasteners to the panel wall.

Powder painted high reflectance white housing. High reflectivity coated, reflecting surfaces for improved efficiency.

Lens assembly is made up of a 3mm tempered safety glass sealed to the lens frame with silicone sealant, mechanically secured. Optional VF-1 reflectors are made of specular PVD aluminum, colourfree with a minumum reflectivity of 95%.

All electrical components are UL listed or CSA approved Ballasts and lamp holders are replaceable without removing the luminaire from the ceiling. All electrical components are mounted on housing only. Lamp holders provided ensure positive lamp retention. See product selection for optional ballasts. Sufficient knockouts are provided for connections and through wiring. Safety interlock switch is provided. For inside access feature, the interlock switch is to be wired in such a way as to disable paint spray equipment when the frame door is opened. As a result, this unit may be mounted in spray booth panels without the previously required second lens.

Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) Class I Division 2, (ETL). Conforms to UL Standard 844. Certified to CAN/CSA Standard C22.2 No. 137.

Polycarbonate rotary lock lampholders.
Prismatic tempered glass (or clear tempered glass with prismatic acrylic overlay).
No cartons - Bulk packed and wrapped on pallets.

Optional Adders
Fuse holder.
VF1- 95% reflectance, specular anodized aluminum reflector.
Flexible cord feed. Two circuit cab tire cord.
Access cover gasketing.